Is my phone permanently bricked?

I was updating my samsung galaxy grand prime duos (SM-G531H) with kies, not knowing my cable was broken while the updating the phone disconnected and i ended up with a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again" i changed the cable and decided to flash the update with odin... process went through and the phone booted up normal with the new update installed... now i decided to factory reset so i went into the stock recovery and did but it came up with a bunch of errors which i didn't take note of... i flashed twrp and repaired the file system, wiped system and then i flashed the the firmware together with the pit file on odin once more... the phone booted up normal and i was using it and eveything when i put it to charge and came back 10 mins later the phone was off.... when i powered it on it just stays on the "samsung galaxy grand prime" screen and doesn't boot... it doesn't go into recovery anymore it just hangs whe're it says "recovery is not seandroid enforcing" i tried flashing the firmware with odin again but every single time i tried it keeps failing at...

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Removed!!
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

I tried the repair firmware together with the pit file and it gets stuck at

<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!

it's been like that for over an hour now... any help would be much appreciated guys.

Attached Thumbnails

   

from xda-developers http://ift.tt/1SD2xI9
via IFTTT